标签： two materials mold

two tone road bike bottle cage mold

Leave a comment

此幻灯片需要JavaScript支持。

YUEYI Mold, China top multi shot mold maker, quality offer two color bottle cages mold, two tone rode bike bottle holder, 2k cycling bike bottle socket, double mold bottle cage!

Every project begins with a cycle objective. We YUEYI and FCS engineering teams examined the required parameters of the molding machine to see if, in fact, they could get to the cycle required.

Partnerships of YUEYI and FCS don’t develop overnight. We two suppliers have worked together for many years with a variety of customers especially for multi shot molding. A level of trust has been achieved that doesn’t often happen when different suppliers are called upon to work together only intermittently during a program. There’s a lot we can do in a partnership situation with a good working relationship. We trust each other much!

If you’re still looking for the good multi component mold maker in China, I’m sure we can be your another good choice!

Lucia

lucia@yueyimold.com

mold construction design for core toggle multi shot molding

Leave a comment

We have discussed the rotary table multi shot mold and rotary shaft multi shot mold before, so today we will talk about the two-color injection of the core toggle mold!

The core toggle multi shot molding process is the easiest, because the core and cavity of the mold do not need to be moved. Conversely, changing the geometry of the mold cavity by moving the slider. Check below pictures:

First inject material A into the cavity, at the same time the slider is in the fully extended position!

Then retracting the slider to reveal a new portion of the cavity！

After that, material B is injected into the reconfigured cavity through a separate gate (above the middle nozzle), the remaining gap is filled by moving the slider！

Then the plastic part hardens and ejected from the mold. Sequentially circulated as the above to continue the molding!

Adding a slider to the mold adds the cost of the tool, but it still can be much more cheaper than rotating platen or rotary shaft mold. Unfortunately, it can not produce the complex multi colored plastic parts.

We YUEYI Mold, China top multi injection mold maker, always here ready to service you, if you’re still looking for the good multi shot mold maker in China!

Lucia

lucia@yueyimold.com

mold construction design for rotary platen multi shot molding

Leave a comment

In the past, a multi materials part was done by using additional secondary services or more complex assemblies. However, today’s multi materials injection molding largely eliminates these additional requirements, making it much more easier to manufacture complex finished parts, faster and cheaper.

According to moving different molded parts can be divided into:

1.      Rotary platen multi shot molding

2.      Rotary shaft multi shot molding

3.      Core toggle multi shot molding

Rotary Platen Multi Shot Molding

The mold core plate contains two identical cores that are mirrored on the centerline of the platen and coincide with the axis of rotation. The cavity plate connected to the fixed platen contains two cavities with different geometries. In each cycle, the rotary platen completes the switching of the molded parts, and eliminates the need for manual switching.

Check below video for better understanding!

Here we only show the two materials mold, which can actually accommodate more materials. The rotary platen can be rotated by 90°, 120° or 180° depending on the amount of material used. Also it will need a special injection machine to provide the required rotation on the core side.

And on my next blogs, I’ll share you my understanding of mold construction design for Rotary shaft multi shot molding & Core toggle multi shot molding!

Hope it will help you for your multi materials molding !

Lucia

lucia@yueyimold.com