China stack turning mold supply

China stack turning mold maker

The advantage of the cube technology over other mold technologies is that the number of cavities for the same machine size can be doubled. Or in other words: for the same production lot, the size of the machine is almost halved.

In the stack turning technology, the mold rotation is performed with a horizontal rotary device in the form of a center plate. Plastic parts are produced in the first parting plane. When the mold is opened, they remain on the side of the moving center plate. For a fully opened mold, the center plate is rotated 180° and placed in the second parting plane. After closing again, the second component is injected in the second cavity where the parts are located on the center block.

When using stack-turning molds with 4 × 90° rotation, stations 2 (operator side) and 4 (non-operator side) can be simultaneously used for further production steps.

For example, station 2 can be used for cooling the molded parts and station 4 can be used for removal by a robotic system. Both functions take place without affecting the cycle time. Alternatively, station 2 can also be used for mounting (in-mold assembly) inside and outside the system.

Anyway, if you’re looking for the good multi material stack turning mold maker in China, then I’m sure we can be your another good choice!

Lucia

focaremould@yahoo.com

multi component cube mold

rotating stack mold

Cube mold technology is distinct from traditional co-injection, because an inner layer is initially molded on one side of the cube, then rotated 180 degrees where the outer layer is over-molded. Both molding stages operate as conventional injection molding processes, which is simpler to set up, maintain, and run continuously in comparison to a more complex co-injection system. It’s comprised of two standard molds, with stacks designed to accurately and repeatably produce the individual layers of the part!

Cube mold technology provides competitive cycle times, this results in a dramatic reduction in part cost. We Focare, as innovative suppliers who bring state-of-the-art capabilities to high volume multi injection molding systems!

If you’re looking for the good multi injection cube mold maker in China, then I’m sure we can be your another good choice!

Lucia

focaremould@yahoo.com

two color electric dental brush mold

 

 

Focare Mould, China top multi injection mold maker, quality offer pp n tpe spinbrush, dual injection motor brush, two tone toothbrush design, two color power dental brush, 2k brush

Today’s injection molding and mold technology has evolved to become more technical and highly automated. For some projects, that means the role of the mold manufacturer is extended into that of a Systems Integrator with increased project management scope.

Key considerations for any multi shot system are the cooling and speed for fast and accurate multi colors injection!

We Focare will offer the below for your project management:

  • Part design
  • Prototype cell
  • Operator training
  • Multi injection mold
  • Multi injection machine
  • IML robot

Anyway, if you’re still looking for a good multi component mold maker in China, then I’m sure we can be your another good choice!

Lucia

focaremould@yahoo.com

two shot spinbrush mold

此幻灯片需要JavaScript支持。

Focare Mould, China top double injection mold maker, quality offer two shot spinbrush mold, two materials powered brush design, electric brush 2k injection mold, 2 component motor brush!

As we are a serious company with great technology and an outstanding team that provides quality and effective solutions. The mold quality is excellent and the mounted molds work according to their specifications, complying with their availability and efficiency.

And because all of our team members are highly qualified to provide solutions according to the proposal needs in an organized way, showcasing benefits and restrictions right from the project launch, so we gain the customers’ trust right from the project start!

The follow up and accuracy in how the projects are executed instills security and trust, aside from the post-sale services which turns us into customers’ partners.

Anyway, if you’re still looking for the good two materials mold maker in China, then I’m sure we can be your another good choice!

Lucia

focaremould@yahoo.com

two color tongue brush mold

此幻灯片需要JavaScript支持。

Focare Mould, China top multi injection mold maker, quality offer double colour tongue brush mold, two materials tongue cleaner, tongue scraper 2k mold design, bicolors dental tools!

Through technical innovation in mold bases, multi injection and multi-level stack molds, we differentiate ourself by delivering higher productivity to the Caps, Closures, technical and medical markets.

Dedicated testing, service, repair and refurbishment resources ensure the capacity to deliver global multi color mold programs which are proven and deliver ongoing performance year after year.

Anyway, if you’re still looking for the good multi injection mold maker in China, I’m sure we can be your another good choice!

Lucia

focaremould@yahoo.com