标签： two color mold design

In the past, a multi materials part was done by using additional secondary services or more complex assemblies. However, today’s multi materials injection molding largely eliminates these additional requirements, making it much more easier to manufacture complex finished parts, faster and cheaper.

According to moving different molded parts can be divided into:

1.      Rotary platen multi shot molding

2.      Rotary shaft multi shot molding

3.      Core toggle multi shot molding

Rotary Platen Multi Shot Molding

The mold core plate contains two identical cores that are mirrored on the centerline of the platen and coincide with the axis of rotation. The cavity plate connected to the fixed platen contains two cavities with different geometries. In each cycle, the rotary platen completes the switching of the molded parts, and eliminates the need for manual switching.

Check below video for better understanding!

Here we only show the two materials mold, which can actually accommodate more materials. The rotary platen can be rotated by 90°, 120° or 180° depending on the amount of material used. Also it will need a special injection machine to provide the required rotation on the core side.

And on my next blogs, I’ll share you my understanding of mold construction design for Rotary shaft multi shot molding & Core toggle multi shot molding!

Hope it will help you for your multi materials molding !

Lucia

focaremould@yahoo.com