12+12cav 2 component toothbrush in mold rotary

此幻灯片需要JavaScript支持。

Mold name: tear drop toothbrush 2 component

Material: PCTG+TPE

Product dimension: 17.1 X 192 X 14mm

Product weight: first color 11g, second color 4g

Steel: core/cavity German S420 with hardness HRC45-48

Cavity: 12+12cav

Gate: 24 tips YUDO valve gate

Mold dimension: 626.8 X 1237.3 X 1010.2mm

Mold weight: 1718kg

Machine: Engel 250T two color injection machine

There are three ways to manufacture the 2 component brush handles:

  • One is by overmolding, it will needs two molds injection, run by the normal single color injection machine.
  • Second is two color mold + shaft rotary two color machine
  • While the third is two color brush in mold rotary + normal two color machine.

As we all know the first one, so here let’s talk about the second & third ones!

If we go ahead with the second, then it needs the machine should be equipped with the shaft rotary structure! At the same time, needs double injection nozzles! Check below pics:

But the two color mold will be relatively easier than the third way! As by the third, will need the toothbrush in mold rotary, i.e. no need the machine have the shaft rotary structure (but sure needs double injection nozzles), it will complete the rotary in the mold.

Above all, by the second, the two color mold will be easier, but the machine is more complex; while by the third, the mold is much more complex, but the machine easier!!!

If you’re still looking for the good toothbrush mold maker in China, we can be your another good choice. We’ll do the custom based on your factory manufacturing situation!

Lucia

focaremould@yahoo.com

TPE toothbrush mold

此幻灯片需要JavaScript支持。

Focare Mould, China top multi component mold maker, quality offer 2 component toothbrush mold shaft rotary injection molding, overmolding TPE brush, 2K rubber mold brush, toothbrush two color mold design!

As we all know, if you prefer to have the toothbrush mold automatic running, then must the injection machine itself equipped with the shaft rotating structure, or shaft rotation in the mold!!! Compared these two, suggest to have the former one, as by this way, the mold construction design will be much more easier also the brush mold cost will be cheaper than the latter. For example, 4+4cav adult toothbrush mold cost is USD28,000, while USD33,500 for the shaft rotation in the mold! But if your two color machine even has no ejector in the center to eject the axis rotary in the mold, then the cost may be over 50% higher than USD28,000.

Or otherwise, over molding will be your best solution, with automation robot system or manual hand to pick the first colored part and then put it into the second mold to have it double colored!

Pls do not hesitate to contact me for your toothbrush mold custom!

Lucia

focaremould@yahoo.com

 

3 component toothbrush mold supply

此幻灯片需要JavaScript支持。

Focare Mould, being the leading multi shot mold maker from Huangyan, quality offer 3 component molds toothbrushes, 3K brush mold, overmolding TPE brush 3 colours die moulds tooth brush with delivery.

There are two ways to mold the 3 component brushes: One is rotating mold with the center shaft triangle structure, pls check above the mold testing video!

And second is by overmolding, it means after first color part eject from the first mold, need to manual put it into the second mold to have it double injection, and again after second mold eject the part, to manual put it into the third mold to have it 3 times injection molding.

Compared to the rotating mold with triangle shaft, overmoulding cost much more molding time but at the same time, the mold cost will be relatively lower!

Feel free to contact for more details of 3 component tooth brush molding!

Lucia

focaremould@yahoo.com

two color molding service supply

Focare Mould, being the top rank China two color mold maker, quality offer bi component molds, tri material plastic injection molds. Also we’re equipped with different types two color molding machines, to meet customers’ different double colour molds, also to offer two color moulding services!

 

  • Table rotary two color machine

此幻灯片需要JavaScript支持。

We have Fu Chun Shin FCS280T table rotary two color machine, and it is ok to molding almost all below two shot plastic housewares, for example plastic injection mold multiple bowls, mugs, dinner plate, etc.

China 2K mold maker

 

此幻灯片需要JavaScript支持。

We have Beston 350T axis rotary two color machine, and it is ok to molding bi component toothbrushes, shaver, manual tools, etc.

China bi component molds toothbrushes maker

 

  • Normal injection machine with an external injection unit

    此幻灯片需要JavaScript支持。

Sometimes customer find to buy a two color injection machine is very expensive, then you may choose this external injection unit, to equip with your normal standard machines! Without this unit, you can also molding single color parts! And it is ok to molding for example the double colour top flip caps!

China double colour top flip caps

 

  • Overmould injection machine 

此幻灯片需要JavaScript支持。

As overmolding will need two molds, after you get the first color part from the first mold, then you need to manual put this first color part into the second mold, to have it double colored! So it will need the standard machines! And we have two sets Haitian 250T machine to meet your molding requirement!

China watering jug overmould

Pls feel free to contact to custom your quality bi component molds! And we’ll help to figure out which is the best molding way for your two colored product!

Lucia

focaremould@yahoo.com

China 2 component toothbrush mold maker

bi component molds toothbrushes

China first-class teethbrush mould maker, Focare Mould specialist manufacture two color mold toothbrush handles, plastic injection mold multiple brushes, die moulds brush with axis rotary 2K injection moulding & overmolding TPE brush

Below tooth brushes are we custom for Egypt customers

brush mold maker China two colorbi component molds toothbrushes

Product name: adult multiple tooth brush

Product dimension: 13.5*186.8*15.2mm

Product weight: 9.7 grams

Mold cavity: 4+4 cavities

Mold steel: core /cavity S136 with hardness HRC45-48

Gate: 8 tips hot runner point gate

Injection machine: Borche 150T axis rotary two color machine

If you have any doubt in toothbrushes two color moulding designs, then we Focare can offer you our experienced help to custom the two colors design. We’ll offer competitive price of tooth brushes two color mould to invite your first order to see what we can do for you, to start your precision and quality toothbrush injection moulding!

Welcome your new inquiry!

Lucia

focaremould@yahoo.com