plastic spork stack mold

China stack spoon mold maker

Focare Mould, China precision mold maker, quatity offer plastic cutlery stack mold, disposable spork knife hamburger mold, plastic fork stacking mold, folding spoon in mold closing

Stack Molds are a series of molding faces “stacked” together to create multiple faces or levels for molding. Each level or face is a parting line and produces molded product.

The benefit of stack molding is to increase the output of a given molding machine and operation. In many cases, parts with a large projected area can be converted or built in a stack mold configuration, doubling the output of a given machine.

Special machine considerations are required to run stack molds, however Focare’s technical team are well versed in providing guidelines and recommendations to ensure success when adopting a stack mold strategy.

Focare provides stack molds in 2, 3 and 4 level configurations based on part designs and volume requirements.

Lucia

focaremould@yahoo.com

hamburger mold laundry rack

Focare Mould, China hanger mold maker, quality offer stack mold clothe hanger, clothe rack hamburger mold, 2 component coat hanger mold, multi shot laundry rack mold, plastic hanger!

Clothes hanger molds make use of high volume stack mold technology, to dramatically increase the productivity of a molding cell. For standard injection molding machines, Focare can provide complete stack mold solutions, that include proper support of the mold center section from the machine clamp frame, as well as incorporating centering devices and fully balanced hot runner solutions, that enable consistent production from all cavities in the mold.

One of Focare’s value added capabilities is melt flow analysis which plays an important role when it comes to ensuring proper filling of certain parts such as clothes hangers.

We Focare also custom you two color drying rack mold with quality and delivery!

此幻灯片需要JavaScript支持。

If you’re still looking for the good plastic hanger stack mold or tpe laundry rack 2k mold maker in China, I’m sure we can be your another good choice!

Lucia

focaremould@yahoo.com

China stack turning mold supply

China stack turning mold maker

The advantage of the cube technology over other mold technologies is that the number of cavities for the same machine size can be doubled. Or in other words: for the same production lot, the size of the machine is almost halved.

In the stack turning technology, the mold rotation is performed with a horizontal rotary device in the form of a center plate. Plastic parts are produced in the first parting plane. When the mold is opened, they remain on the side of the moving center plate. For a fully opened mold, the center plate is rotated 180° and placed in the second parting plane. After closing again, the second component is injected in the second cavity where the parts are located on the center block.

When using stack-turning molds with 4 × 90° rotation, stations 2 (operator side) and 4 (non-operator side) can be simultaneously used for further production steps.

For example, station 2 can be used for cooling the molded parts and station 4 can be used for removal by a robotic system. Both functions take place without affecting the cycle time. Alternatively, station 2 can also be used for mounting (in-mold assembly) inside and outside the system.

Anyway, if you’re looking for the good multi material stack turning mold maker in China, then I’m sure we can be your another good choice!

Lucia

focaremould@yahoo.com

edible oil bottle cap mold

此幻灯片需要JavaScript支持。

Focare Mould, China top precision mold maker, quality offer edible oil cap mold, plastic CTC bottle closure mold, single piece edible closure mold, PET bottle oil cap injection mold !

With a specialisation in closure moulds with collapsing cores, in-mold closing, and co injection molding, we Focare can reel off a list of industry firsts in which it was involved.

Making molds run faster and focusing cooling are just two areas that Focare are innovating in order to improve the manufacturing process.

We focus more on the mold design and are good collaborators. It’s never just about a mold, even if we are a mold maker. we offered not just the mold, but full Turnkey systems in addition to part design!

Lucia

focaremould@yahoo.com

double deck injection mold 2k

 

co injection stack mold China supply

Focare Mould, China top co injection mold maker, quality offer two color stack mold, multi shot stack molding, double-deck injection mold 2k, plastic double multiple mold!

Thanks to the previous failure experience, now we’re very familiar with the production of stack molds.

And stack mold technology allows for the creation of the right plastics solution, using it in combination with any other applicable technologies that are part of Focare’s offerings:

Two color stack molds to increase productivity of each injection molding machine
Two color stack mold designs have evolved to successfully fill the needs of a wide variety of injection molding plastic applications. As the need for high production volumes are climbing, there may never have been a better time to review the present-day features and capabilities of stack mold technology.

If you’re still looking for the multi shot stack mold maker in China, we Focare can be your only choice!

Lucia

focaremould@yahoo.com