plastic spork stack mold

China stack spoon mold maker

Focare Mould, China precision mold maker, quatity offer plastic cutlery stack mold, disposable spork knife hamburger mold, plastic fork stacking mold, folding spoon in mold closing

Stack Molds are a series of molding faces “stacked” together to create multiple faces or levels for molding. Each level or face is a parting line and produces molded product.

The benefit of stack molding is to increase the output of a given molding machine and operation. In many cases, parts with a large projected area can be converted or built in a stack mold configuration, doubling the output of a given machine.

Special machine considerations are required to run stack molds, however Focare’s technical team are well versed in providing guidelines and recommendations to ensure success when adopting a stack mold strategy.

Focare provides stack molds in 2, 3 and 4 level configurations based on part designs and volume requirements.

Lucia

focaremould@yahoo.com

hamburger mold laundry rack

Focare Mould, China hanger mold maker, quality offer stack mold clothe hanger, clothe rack hamburger mold, 2 component coat hanger mold, multi shot laundry rack mold, plastic hanger!

Clothes hanger molds make use of high volume stack mold technology, to dramatically increase the productivity of a molding cell. For standard injection molding machines, Focare can provide complete stack mold solutions, that include proper support of the mold center section from the machine clamp frame, as well as incorporating centering devices and fully balanced hot runner solutions, that enable consistent production from all cavities in the mold.

One of Focare’s value added capabilities is melt flow analysis which plays an important role when it comes to ensuring proper filling of certain parts such as clothes hangers.

We Focare also custom you two color drying rack mold with quality and delivery!

此幻灯片需要JavaScript支持。

If you’re still looking for the good plastic hanger stack mold or tpe laundry rack 2k mold maker in China, I’m sure we can be your another good choice!

Lucia

focaremould@yahoo.com

China stack turning mold supply

China stack turning mold maker

The advantage of the cube technology over other mold technologies is that the number of cavities for the same machine size can be doubled. Or in other words: for the same production lot, the size of the machine is almost halved.

In the stack turning technology, the mold rotation is performed with a horizontal rotary device in the form of a center plate. Plastic parts are produced in the first parting plane. When the mold is opened, they remain on the side of the moving center plate. For a fully opened mold, the center plate is rotated 180° and placed in the second parting plane. After closing again, the second component is injected in the second cavity where the parts are located on the center block.

When using stack-turning molds with 4 × 90° rotation, stations 2 (operator side) and 4 (non-operator side) can be simultaneously used for further production steps.

For example, station 2 can be used for cooling the molded parts and station 4 can be used for removal by a robotic system. Both functions take place without affecting the cycle time. Alternatively, station 2 can also be used for mounting (in-mold assembly) inside and outside the system.

Anyway, if you’re looking for the good multi material stack turning mold maker in China, then I’m sure we can be your another good choice!

Lucia

focaremould@yahoo.com

multi component cube mold

rotating stack mold

Cube mold technology is distinct from traditional co-injection, because an inner layer is initially molded on one side of the cube, then rotated 180 degrees where the outer layer is over-molded. Both molding stages operate as conventional injection molding processes, which is simpler to set up, maintain, and run continuously in comparison to a more complex co-injection system. It’s comprised of two standard molds, with stacks designed to accurately and repeatably produce the individual layers of the part!

Cube mold technology provides competitive cycle times, this results in a dramatic reduction in part cost. We Focare, as innovative suppliers who bring state-of-the-art capabilities to high volume multi injection molding systems!

If you’re looking for the good multi injection cube mold maker in China, then I’m sure we can be your another good choice!

Lucia

focaremould@yahoo.com

vacuum blood collection tube mold supply

vacuum blood collection tube mold
blood collection tube mold

Focare Mould, China top medical mold maker, quality offer vacuum tube mold, blood collection tube mold, test tube injection mold, plastic lab SST tube mold, multi cavities plain tube mold supply!

Custom medical molds are developed with Focare’s 3D capabilities for medical parts development, prototyping, and mold design. We provide customers with a knowledgeable resource in customizing high performance technologies to challenging medical applications.

With our combination of high productivity solutions, advanced mold design and manufacturing capabilities and innovative medical expertise, Focare is the logical choice for your next custom MEDICAL project.

Lucia

focaremould@yahoo.com