plastic spork stack mold

China stack spoon mold maker

Focare Mould, China precision mold maker, quatity offer plastic cutlery stack mold, disposable spork knife hamburger mold, plastic fork stacking mold, folding spoon in mold closing

Stack Molds are a series of molding faces “stacked” together to create multiple faces or levels for molding. Each level or face is a parting line and produces molded product.

The benefit of stack molding is to increase the output of a given molding machine and operation. In many cases, parts with a large projected area can be converted or built in a stack mold configuration, doubling the output of a given machine.

Special machine considerations are required to run stack molds, however Focare’s technical team are well versed in providing guidelines and recommendations to ensure success when adopting a stack mold strategy.

Focare provides stack molds in 2, 3 and 4 level configurations based on part designs and volume requirements.

Lucia

focaremould@yahoo.com

double deck injection mold 2k

 

co injection stack mold China supply

Focare Mould, China top co injection mold maker, quality offer two color stack mold, multi shot stack molding, double-deck injection mold 2k, plastic double multiple mold!

Thanks to the previous failure experience, now we’re very familiar with the production of stack molds.

And stack mold technology allows for the creation of the right plastics solution, using it in combination with any other applicable technologies that are part of Focare’s offerings:

Two color stack molds to increase productivity of each injection molding machine
Two color stack mold designs have evolved to successfully fill the needs of a wide variety of injection molding plastic applications. As the need for high production volumes are climbing, there may never have been a better time to review the present-day features and capabilities of stack mold technology.

If you’re still looking for the multi shot stack mold maker in China, we Focare can be your only choice!

Lucia

focaremould@yahoo.com

plastic cutlery in mold close

plastic cutlery in mold close

Focare Mould, China precision mold maker, quality offer plastic cutlery in mold close system, folded cutlery injection mold, spoon n fork stack mold hamburger injection moulding!

For cutlery molds, normally will be multi cavities, and we Focare technologies including stack molds, as well as in mold closing system can reach your high output requirement.

Parts can be molded with a living hinge at the middle of the handle, and it will be folded in the mold and locks the parts in the folded position before part ejection!

In mold close for plastic cutlery enables packing of the spoon n fork into a much smaller space! And most of Focare’s cutlery molds have been built in 2×32 and 2×48 constructions.

If you’re still looking for the good stack mold maker in China, then we can be your another good choice!

Lucia

focaremould@yahoo.com

co injection stack mold supply

co injection stack mold China supply

Co injection molds is widely used in food and medical packaging, and we Focare provides co injection tooling based on innovated technology and systems – CO INJECTION STACK MOLD supply!

Co-injection stack mold can effectively solve the low output of customers’ two-color molded parts, greatly increase the production and reduce the consumption costs!

While compared to the single layer two color mold, the clamping force of co-injection stack mold will be 1.2-1.5 times! And the molding cycle time will be very similar, but the output efficiency is more than 1.8 times!

So what should be paid attention while doing the co-injection stack mold??

  • co injection stack molding with robotic transfer or the mold core part rotary is ok!
  • The mold requires high machining accuracy and high concentricity
  • The mold construction design must consider a reasonable and dedicated mold base system, hot runner system, load guidance system, two-way ejection system, linkage secondary molding system, etc.

We Focare team has accumulated over ten years of R & D and manufacturing experience in multi material molding technology. Foreseeably design and correct defects for various two-color parts, and support customers with the mature bi material molding technologies!!

If you’re troubled with the low output of your current 2k molding, if you’re still looking for the good 2k mold maker in China, then we can be your another good choice!

Lucia

focaremould@yahoo.com

plastic hangers stack mold

此幻灯片需要JavaScript支持。

Focare Mould, one of the leading mold makers from Huangyan, professional custom you the quality plastic hanger molds, two color clothes rack mold, hangers stacking mold!

So what’s the key technics of the stack mold???

  • It should be accurately calculate the mold flow of the design, to avoid uneven feeding of two layers of the hangers!
  • Compared to the normal molds, the hot runner solutions of stack mold should be much better, should be not easy to leakage!
  • The mold structure and movement should be reasonable!
  • The filling area should be well calculated, to avoid insufficient clamping force of injection machine!
  • And the mold machining must be high precision!

Also we Focare specialized offering hangers in two color molding designs, 2 component drying rack supply. Guarantee you the quality & delivery!

2 component plastic hangers

If you’re still looking for the good precision mold maker in China, then we can be your another good choice!!

Highly welcome your down visiting to check our works!

Lucia

focaremould@yahoo.com