two color insert molding

此幻灯片需要JavaScript支持。

Focare Mould, China top 2k mold maker, quality offer 2 component plastic injection mold, two color mold rotary, two molds injection over molding, 2 color insert molding!

Well, as we all know there are two ways to make the 2 colored part, one is by double shot injection at one time, second is by insert over molding, need further secondary molding processing. But why some parts can only go ahead with the insert molding? while some parts can go with the both two shot injection & over molding?? Well, it should depends on the product design!

If you have a new project of 2k molds, then pls come to us. We can do the custom of your requirement. Or even you have only the thought, no details 2D or 3D drawings of the part, no problem, we’ll do the good two color design for your choose!

Let’s start with a trial mold, then you’ll know what we can do for you!

Lucia

focaremould@yahoo.com

2k fresh keeping box lid mold

food box cover 2k mold design

If you’re just new start in the two color molding, if you have no good ideas of the product design, if you’re still looking for the good 2k mold maker in China, then we Focare Mould can be your another good choice!

2 components injection molding makes it possible to produce a completely assembled product so that this part does not need further secondary processing . That means gains in the cycle time, a constant process, a higher degree of efficiency and the avoidance of manual insertion. And because the post-processing or assembly is not longer necessary, you can also save considerably on costs with 2 components molding.

For example above the two colored fresh box lid mold, with the TPE sealing oring melt together with PP, then no need to manual put the oring at a later stage! Greatly save time & labor cost! Also it is 100% water leakage proof!

Welcome your 2k mold inquiry!

Lucia

focaremould@yahoo.com

 

12+12cav 2 component toothbrush in mold rotary

此幻灯片需要JavaScript支持。

Mold name: tear drop toothbrush 2 component

Material: PCTG+TPE

Product dimension: 17.1 X 192 X 14mm

Product weight: first color 11g, second color 4g

Steel: core/cavity German S420 with hardness HRC45-48

Cavity: 12+12cav

Gate: 24 tips YUDO valve gate

Mold dimension: 626.8 X 1237.3 X 1010.2mm

Mold weight: 1718kg

Machine: Engel 250T two color injection machine

There are three ways to manufacture the 2 component brush handles:

  • One is by overmolding, it will needs two molds injection, run by the normal single color injection machine.
  • Second is two color mold + shaft rotary two color machine
  • While the third is two color brush in mold rotary + normal two color machine.

As we all know the first one, so here let’s talk about the second & third ones!

If we go ahead with the second, then it needs the machine should be equipped with the shaft rotary structure! At the same time, needs double injection nozzles! Check below pics:

But the two color mold will be relatively easier than the third way! As by the third, will need the toothbrush in mold rotary, i.e. no need the machine have the shaft rotary structure (but sure needs double injection nozzles), it will complete the rotary in the mold.

Above all, by the second, the two color mold will be easier, but the machine is more complex; while by the third, the mold is much more complex, but the machine easier!!!

If you’re still looking for the good toothbrush mold maker in China, we can be your another good choice. We’ll do the custom based on your factory manufacturing situation!

Lucia

focaremould@yahoo.com

plastic hangers stack mold

此幻灯片需要JavaScript支持。

Focare Mould, one of the leading mold makers from Huangyan, professional custom you the quality plastic hanger molds, two color clothes rack mold, hangers stacking mold!

So what’s the key technics of the stack mold???

  • It should be accurately calculate the mold flow of the design, to avoid uneven feeding of two layers of the hangers!
  • Compared to the normal molds, the hot runner solutions of stack mold should be much better, should be not easy to leakage!
  • The mold structure and movement should be reasonable!
  • The filling area should be well calculated, to avoid insufficient clamping force of injection machine!
  • And the mold machining must be high precision!

Also we Focare specialized offering hangers in two color molding designs, 2 component drying rack supply. Guarantee you the quality & delivery!

2 component plastic hangers

If you’re still looking for the good precision mold maker in China, then we can be your another good choice!!

Highly welcome your down visiting to check our works!

Lucia

focaremould@yahoo.com

2 colour snap cap in mold close

Dove shampoo caps two color

We Focare Mould, China top 2K mold maker, quality offer precision cap mold double color, bicolor injection machine for shampoo cap, two color flip top cap for plastic bottles, bicolor cap injection mold, flip top cap in mold close in two color molding designs! Unscrewing demoulding flip top caps auto close in mold supply. 

two color snap cap in mold close

The most important to make a good 2K flip top cap, is the inserts on hinge part move to allow the second color injecting! The inserts must be very wear resistance! Imported high-end heat-treatment steel should be used, also the inserts under our specially processed, they’re self-lubricating and the surface hardness can reach HV2500-3000!

And the key to have the auto close in mold construction, should be smooth function, fast speed, light weight but also strong strength! So we use the material of aviation aluminum to realize to have the light weight, thus to have the fast speed, and to shorten the cycle time! And the bkelite resin used to touch the caps for the capping, to ensure the flip caps will not be scratched any! In additionally, the trajectory of flip top capping should be calculated accuracy!

flip top cap in mold close construction

If you’re still looking for the good 2K snap top cap mold maker in China, we can be your another good choice!

Welcome your new inquiry!

Lucia

focaremould@yahoo.com

robot automation 2K mold container lid

此幻灯片需要JavaScript支持。

此幻灯片需要JavaScript支持。

Mold name: 2k container lid

Raw material: PP+TPE

Product dimension: 180 * 149.8 * 11mm

Product weight: PP 27.3g, TPE 4.2g

Mold cavity: 4+4cav

Steel: core/cavity 718H with hardness HRC30-33

Gate: first color PP 4 tips hot runner valve gate,

second color TPE 8 tips hot runner valve gate

Mold dimension: 778 * 1210 * 546mm

Mold weight: 1783kg

Injection machine: BMB 450T two color machine

Focare Mould, China top 2K mold maker, offer quality two color cap mould, bicolor injection machine for container cap, double colour plastic container lid, bi colors food fresh kept box, 2K rubber preserving box mold, dual colour food storage container cover! Successfully customed 2K container lid mold for Plásticos Kendy Colombia S.A.S. Above video is took by the customer, now the mold is fully automatic running with the robot system.

We insist mold construction design and steel quality is the key to achieve molds with excellent performance! Most important thing is mold must be very durable which is always our basic policy! Start from the design procedure until the mold assembling, what we all do is just to follow this policy!

We’re sincere to invite you to down visit us, to check how we do our molds, to see thus to believe what we can do for you! Pls give me a chance to serve you, also give yourself a chance to get a good 2K mold with competitive cost!

Lucia

focaremould@yahoo.com

2 component screw driver handle mold

此幻灯片需要JavaScript支持。

Focare Mould, China top 2K mold maker, quality offer 2 component mold for screw drivers, two color bolt driver, TPE screwdrive in double colour mold design! Two shot turnscrew, bi colors mould gimlet.

Suggest to go ahead with two color axis rotary machine, while compared to the turntable injection machine. Due to both sides of the screw drivers have PP & TPE pattern! It will be just similar as the 2 component toothbrush molding ! Pls find below the mold testing video of toothbrush for your reference!

If you’re still looking for the good 2K mold maker in China, then I’m sure we can be your another good choice! Start from the product & mold design procedure, we fully consider all the problems that may happen in the future your side manufacturing! Highly welcome your down visiting to check our works!

To see is to believe!

Lucia

focaremould@yahoo.com

two color salad mixing bowl mold

此幻灯片需要JavaScript支持。

Focare Mould, China top rank two color mold maker, quality offer two tone salad mixing bowls, bicolor bowl salad, double injection pasta serving bowl rotary mold, 2K mould picnic bowls chips bowl double colour!!

Especially for plastic kitchenwares, the product design is the key to win your market, to meet the market demand! We Focare equipped with very strong design ability for the positive engineering and reverse engineering, to take responsible of your two color project in the very first step!

We’re sincere to invite your down visiting to check our works! And I would love to show you the details of our 2K design jobs, to see thus to believe what we can do for you!

Lucia

focaremould@yahoo.com