标签： 2K mold China

12+12cav 2 component toothbrush in mold rotary

Leave a comment

此幻灯片需要JavaScript支持。

Mold name: tear drop toothbrush 2 component

Material: PCTG+TPE

Product dimension: 17.1 X 192 X 14mm

Product weight: first color 11g, second color 4g

Steel: core/cavity German S420 with hardness HRC45-48

Cavity: 12+12cav

Gate: 24 tips YUDO valve gate

Mold dimension: 626.8 X 1237.3 X 1010.2mm

Mold weight: 1718kg

Machine: Engel 250T two color injection machine

There are three ways to manufacture the 2 component brush handles:

  • One is by overmolding, it will needs two molds injection, run by the normal single color injection machine.
  • Second is two color mold + shaft rotary two color machine
  • While the third is two color brush in mold rotary + normal two color machine.

As we all know the first one, so here let’s talk about the second & third ones!

If we go ahead with the second, then it needs the machine should be equipped with the shaft rotary structure! At the same time, needs double injection nozzles! Check below pics:

shaft rotary structure
double injection nozzles

But the two color mold will be relatively easier than the third way! As by the third, will need the toothbrush in mold rotary, i.e. no need the machine have the shaft rotary structure (but sure needs double injection nozzles), it will complete the rotary in the mold.

Above all, by the second, the two color mold will be easier, but the machine is more complex; while by the third, the mold is much more complex, but the machine easier!!!

If you’re still looking for the good toothbrush mold maker in China, we can be your another good choice. We’ll do the custom based on your factory manufacturing situation!

Lucia

focaremould@yahoo.com

two color mold bento container

Leave a comment

China two color food containers mold

China top 2K mold maker, Focare Mould, quality offer bento box in two color moulding designs, bi colors storage container mold, double color food containers injection molded, plastic box lunch bi injection mold rotary!

How to get the 100% anti-leakage bento box injection molded??

Here are two ways: one is as above picture showed, due to the bento box is PP+PP two color moulding design, also the lid is single color, so should have the TPE o-ring inside to ensure the box no leakage!

The other is to directly make the TPE seals together with the lid, for example as below picture showed!

bi color mold organizer box cover design

By this way, will be no need to extra make the o-rings and manual putting it into the lid! And we Focare with strong abilities of the two color molding, will definitely ensure to offer you the best two color product design & two color mold design, to ensure the excellent performance double color injection molds that you’ll have!!!

If you’re still looking for the good 2K mold maker in China, we can be your another good choice!

Lucia

focaremould@yahoo.com

two color snack bowl

Leave a comment

此幻灯片需要JavaScript支持。

China two color dinner bowl mold

Mold name: plastic serving bowl two color 

Plastic material: PP

Product dimension: mini size 99.9 X 99.9 X 55mm

medium size 135.2 X 135.2 X 75mm

large size 248.8 X 248.8 X 130mm

Product weight: mini size 21.2g, medium 48.3g, large size 193g

Cavity number: mini size & medium size 2+2cav, large size 1+1cav

Steel: core/cavity 718H with hardness HRC30-33

Gate: 6 tips hot runner point gate

Delivery: T1 in 60 days after mold design confirmed by your side

Focare Mould, China top two color mold maker, quality offer 2K salad plastic bowls, double color injection mold serving bowl, snack bowls rotary mold, bicolor picnic bowl injection molded, bowls salad in two color molding designs.

We guarantee to provide effective and fast solutions to your 2K molding requirements.

We aim to help our customers in a most effective process and two color molding way.

Contact us for all your needs, you can benefit from our technical services support who is dedicated to have the quality two color molds!

Lucia

focaremould@yahoo.com

TPE toothbrush mold

Leave a comment

此幻灯片需要JavaScript支持。

Focare Mould, China top multi component mold maker, quality offer 2 component toothbrush mold shaft rotary injection molding, overmolding TPE brush, 2K rubber mold brush, toothbrush two color mold design!

As we all know, if you prefer to have the toothbrush mold automatic running, then must the injection machine itself equipped with the shaft rotating structure, or shaft rotation in the mold!!! Compared these two, suggest to have the former one, as by this way, the mold construction design will be much more easier also the brush mold cost will be cheaper than the latter. For example, 4+4cav adult toothbrush mold cost is USD28,000, while USD33,500 for the shaft rotation in the mold! But if your two color machine even has no ejector in the center to eject the axis rotary in the mold, then the cost may be over 50% higher than USD28,000.

Or otherwise, over molding will be your best solution, with automation robot system or manual hand to pick the first colored part and then put it into the second mold to have it double colored!

Pls do not hesitate to contact me for your toothbrush mold custom!

Lucia

focaremould@yahoo.com

 

two color mold plastic bread basket

Leave a comment

此幻灯片需要JavaScript支持。

Focare Mould Co.,Ltd, China top two color molds maker, quality offer 2K bread basket mold, double color salad bowl, bicolor serving bowl injection mold, fruit dish fruit basket bi injection molding.

Many customers complain that our mold cost is very high, but pls let me expain why:

As we all know, mold price can be different 100% due mainly to his details,

steel quality, mold construction design, machining way, cooling system, hot runner system…. and so on.

  • Steel quality: We use the real quality steel, not like most mold makers here in China are cheating in steel! Then customers may tell that they can ask the supplier to provide the steel certificate to prove it is the right steel they’ll use. Well, I’ll keep silence about this, anyway, unless you trust that supplier very well, otherwise do not believe even they provide you the certificate!
  • Mold construction design: Except the steel quality, mold construction is the key that we insist to have the molds with excellent performance! That’s why we pay much more attention on it to make the mold durable and easy maintenance! Pls contact me for the details, I would love to share you our two color mold design!
  • Machining way: Some experienced customers may ask the supplier to share the details break up of mold cost, but honestly speaking, it can only clearly show you the steel cost & hot runner cost, for the key machining cost still will be a big problem. As we all know, CNC machines have many different levels according to their precision work. So the machining cost will be corresponding differ a lot. And for us, we ensure you to use the high speed CNC to reach 0.02mm precision!
  • Hot runner system: Well, for customers who know Huangyan market very well, then they should know the Huangyan local brand hot runner system is only cost 500RMB per tip, but ours is USD750 per tip! Compared to the traditional heaters is circled around the nozzle body, ours is more stable working as heaters are all inserted into the nozzle body! Design is just similar as YUDO!

In additionally, all the spare parts we use, is brand imported, for example JunFan cylinder from Taiwan,  Japan Daido springs and Korea Samsol springs, etc. Just to avoid some stupid mistakes happen!

So what we offer you is the quality mold with very reasonable cost!

Anyway, if you’re looking for the durable mold with easy maintenance, pls feel free to contact with me! We’ll offer the best to invite your first order to see what we can do for you!

Lucia

focaremould@yahoo.com