rotary mold 5 gallon caps

Focare Mould, China top bi shot mold maker, quality offer co injection 5 gallon cap, two colors cap for water bottle 5 gallons, 2k plastic caps, double injection molded closures

Multi component technology is extremely diverse: from sandwich injection molding and the core-back process through to transfer, rotation or turning stack mold technology and combinations of this, e.g. with insert or gas injection technology. We offer you competent consulting!

If you’re still looking for the good multi component mold maker in China, then I’m sure we can be your another good choice!

Lucia

focaremould@yahoo.com

sophisticated pepper can lid mold design

此幻灯片需要JavaScript支持。

Pepper can lid mold design — slider + unscrewing + core pulling + inserts interchangeable

4cav small lid with oversized mold due mainly to its complicated mold structure which contain 4 kinds of mechanism!

  • sliders to releasing cap outside shake undercut, protected well by hardened wear plates to avoid steel collapse and easy maintenance
  • unscrewing device to release inner threads! Mold equipped with hydraulic motor with hardened gear set with good oil lubricated system to enable it functioning properly!
  • core pulling system to release those front holes with 3 kinds of different diameters to fit salt, pepper and sugar!

Mold design advantage is to make 3 molds into one mold to save at least 50% mold cost! And we’re proud of saying that we’re very strong in making such sophisticated mold structure!

Focare Mould, China top cap mold maker, offer plastic pepper can lid mold unscrewing with collapsible cores demoulding, unscew closure mold design, spice bottle cap mould!

If you’re still looking for the good cap mold maker in China, then we can be your another good choice!

Lucia

focaremould@yahoo.com

bottle shampoo caps in two color mold design

bottle flip top cap 2k

Focare Mould, China top 2k mold maker, quality offer bottle shampoo caps in two color mold design, 2k flip top cap in mold close, double color unscrew mold for snap cap closure, unscrewing design bicolor flip cap auto closing mold!

  • Are you still looking for the good 2k snap top cap mold maker in China?
  • Do you prefer to have the cap mold durable and easy maintenance?
  • How to choose the best structure to have the unscrewing demoulding? By rack design or by hydraulic cylinder??
  • How to make the two colors clearly separated especially at the flip cap hinge part??
  • Also for the flip cap auto closing in mold, how to calculate the trajectory of the auto close device, to have the precision and functional closing system??
  • What material for the auto closing device should be chose to have it fast speed, light weight but at the same time should be strong enough??

We Focare, lead by Taiwan boss, focus on the mold construction design and steel quality, we insist these two factors are the key to achieve molds with excellent performance!

Pls feel free to contact me, if you have any new project of bicolor caps injection mold.

I would love to show you all the details of how we do the molds.

Lucia

focaremould@yahoo.com

2k dispensing caps snaptop

bicolor bottle shampoo cap

Focare Mould, China top 2k mold maker, quality offer two color dispensing caps snaptop, shampoo bottles flip top in 2 colour mold design, 2k injection mold flip caps, snap top closures in mold close, unscrewing demoulding flip top caps.

  • Do you prefer to have a top quality flip top cap mold durable manufacturing & simply maintenance?
  • What should be paid attention during the flip cap two color mold design?
  • How to achieve the hinged part flexible, and the two colors not over flow at the same time??
  • Which material should be used for the in mold close structure? To have it smooth function, fast speed, light weight but also strong strength!
  • How to achieve the fast cycle time for the shampoo caps molding??

If you have any doubts of above questions, if you’re still looking for the good auto close in mold snap caps mold maker in China, pls do not hesitate to contact with me!

We’re Taiwan quality but with Chinese price! Highly welcome your down visiting to check how we do our molds, to see is to believe!

Lucia

focaremould@yahoo.com

bicolor cap molding supply

此幻灯片需要JavaScript支持。

To be honest, plastic caps molding market is very big, especially for cosmetic packaging, shampoo bottle packaging & oil packaging !

But now the single color cap is already flooding all over the world, so the profit for investors must be very less! Then how to get a higher profit?? How to get a breakthrough in the product of plastic caps?

Well, the answer definitely is 2k plastic caps!

So what’s the advantage if changing to 2k caps??

  • Suppliers can gain more time to occupy the market

As we all know, now piracy is very rampant, especially China and India. But since bicolor cap no matter product design or mold construction design, it is much more complex than single color cap. So it will not easy to be copied! So suppliers can gain much more time to occupy the market, it means can gain more time to get more profits before the cap has been copied and enter into the market! And for all businessmen, the profit is the key to think about to start a new project!

But compared with single color cap mold & machine, the invest of two color mold & 2k injection machine will be much higher, which may also discourage the most investors!

But don’t worry, we Focare Mould can be your good choice to continue your 2k projects! We’re the top two color mold maker here in Taizhou, also we have our own table rotary 2k machine & shaft rotary bicolor injection machine, which is able help to do the molding services for you!

As for the mold cost, sure we’ll offer you our best, also if your required molded caps quantity is large, we’re ok to bear the mold cost by ourselves!

So highly welcome your molding 2k caps inquiry!

Lucia

focaremould@yahoo.com

two color flip top mold for plastic bottles

此幻灯片需要JavaScript支持。

Focare Mould, China top two color mold maker, quality offer 2K shampoo caps flip top, bottle flip top cap in two color moulding designs, double colour flip top mold for plastic bottles, shampoo bottle double snap top closure!

As we all know for such flip top cap mold, the hinge part will be the key, since it will directly affect the feel of the customer‘s usage! So the hinge part can not be too hard, neither too soft, it should have a certain of flexibility, and the best effect is to have a snapped sound after cover the cap!

So what should we do for the hinge part, especially for 2k snap top cap mold?? We should make the inserts on hinge part move to allow the second color injecting! At the same time, imported high-end heat-treatment steel should be used, to have the inserts wear resistance! Also the inserts under our specially processed, they’re self-lubricating and the surface hardness can reach HV2500-3000!

If you’re still looking for the good bicolor cap injection mold maker in China, we can be your another good choice.

Lucia

focaremould@yahoo.com

2 colour snap cap in mold close

Dove shampoo caps two color

We Focare Mould, China top 2K mold maker, quality offer precision cap mold double color, bicolor injection machine for shampoo cap, two color flip top cap for plastic bottles, bicolor cap injection mold, flip top cap in mold close in two color molding designs! Unscrewing demoulding flip top caps auto close in mold supply. 

two color snap cap in mold close

The most important to make a good 2K flip top cap, is the inserts on hinge part move to allow the second color injecting! The inserts must be very wear resistance! Imported high-end heat-treatment steel should be used, also the inserts under our specially processed, they’re self-lubricating and the surface hardness can reach HV2500-3000!

And the key to have the auto close in mold construction, should be smooth function, fast speed, light weight but also strong strength! So we use the material of aviation aluminum to realize to have the light weight, thus to have the fast speed, and to shorten the cycle time! And the bkelite resin used to touch the caps for the capping, to ensure the flip caps will not be scratched any! In additionally, the trajectory of flip top capping should be calculated accuracy!

flip top cap in mold close construction

If you’re still looking for the good 2K snap top cap mold maker in China, we can be your another good choice!

Welcome your new inquiry!

Lucia

focaremould@yahoo.com

cap molding for auto unscrew

Focare Mould, China top cap mold maker, quality offer multi cavities unscrewing oil cap injection mold, flip top cap unscrew high speed injection, unscrewing mold design, unscrew closure mold hydro motor

cap unscrewing mold design8 cavity unscrew cap mold hydro motor

Mold name: Oil caps mold 

Product material: PE

Product dimension: 51 X 47 X 20mm

Product weight: 4.6 grams

Cavity number: 8cav

Steel: core/cavity S136 with hardness HRC45-48

Gate: 8 tips hot runner point gate

Mold dimension: 340 X 670 X 355mm

Mold weight: 347kg

Machine: HN 150T

If you’re still looking for the good unscrewing mold maker in China, then I’m sure we can be your another good choice!

Highly welcome your down visiting to see how we do our molds, thus to believe what we can do for you! We offer you not only a mold, but a fine cap molding solution!

Lucia

focaremould@yahoo.com